Tehnički podaci za TZe i HGe trake

Publikacije

Brošura sa tehničkim podacima za Brother TZe i HGe trake

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this presentation by email!

Embed in your website

Select page to start with

2. Brother P-touch laminated labels have been designed to last, wherever you use them Whether you need a professional labelling solution for the office, industry or home, Brother P-touch laminated labels have been designed with you in mind. We’ve thought about exactly when, where and how you might need to use our labels and put them through a series of rigorous tests, which means that even when they’re exposed to heavy abrasion, heat, cold, sunshine, water and chemicals, our labels have been designed to last.

14. 1. A random sample of tape types were selected and used to perform these tests. Accordingly, results may have differed slightly, depending on the type of tape used. 2. The actual test results were acquired under specific conditions configured by Brother, with the sole aim of providing information contained within this booklet. Brother does not guarantee the strength, safety or accuracy of numerical data. 3. Since tape adherence performance is affected by the material the tape is attached to, the material’s surface condition, whether it is greasy, dusty, rough or curved, and the environmental conditions, the customer should confirm adherence performance under actual usage conditions after purchasing the tape required, and use the product under their own responsibility. 4. Brother accepts no responsibility for injuries or lost earnings resulting from application of the information contained in this document. Notes

1. Tehnički podaci za TZe i HGe trake

3. Brother P-touch laminated labels Unlike ordinary labels, our laminated tape technology ensures that a layer of super-clear polyethylene laminate protects your text. Brother P-touch laminated TZe tapes consist of six layers of materials, resulting in a thin, extremely strong label. Characters are formed with a thermal transfer ink and sandwiched between two protective layers of PET (polyethylene film). The result is a virtually indestructible label that can withstand even the harshest conditions. In fact, we are sure about the durability of our labels because we’ve tested them to the extreme, against the effects of abrasion, temperature, chemicals and sunlight. Our results prove that Brother P-touch laminated labels out-perform competitor labels, staying legible and attached, so you can be confident of a professional quality label that has been designed to last. The following pages will show you exactly how our labels are tested to the extreme. Why do Brother P-touch laminated labels last longer? Lamination provides an extra protective overcoat protective coating (PET) 38μ m adhesive (acrylic) coloured base film (PET) adhesive (acrylic) letterin g backing paper protective coating (PET) adhesive (acrylic) coloured base film (PET) adhesive (acrylic) backing paper lettering

4. Abrasion Test Brother’s tape lamination technology ensures that Brother P-touch laminated labels can even withstand heavy abrasion. The Abrasion Test Procedure A 1kg sanding device was passed over Brother P-touch laminated labels, and non-laminated competitor labels. After 50 return passes the characters underneath the Brother P-touch laminated label were completely unaffected and the lamination was only slightly scratched. Abrasion Resistant Labels Brother P-touch Laminated Label Non-Laminated Competitor Label Can withstand heavy abrasion Abrasion Tests Results Brother P-touch laminated TZe label = No effect on print quality Competitor non-laminated label = Print quality affected

9. Strong Adhesion Test The Adhesion Test Procedure To test the adhesive strength of Brother P-touch laminated tapes, 12mm standard, extra strength adhesive, flexible ID and security tape were affixed to a variety of materials at room temperature and left for 30 minutes. Adhesive strength was tested by removing the tape at an angle of 180 degrees. This testing method complies with Japanese Standard JIS Z0237 testing. Test Results The table explains that an adhesive strength of approximately 6 Newtons* was maintained with most materials. Our strong adhesive tape maintained an average of 50% more adhesive strength compared to our standard tape and is suitable for more demanding surfaces such as polypropylene. Strong Adhesion Strong adhesion to a wide range of surfaces 7.6 10 7.6 2.8 7.2 10. 1 8.6 11. 5 6.9 11. 5 3.3 7.4 6.4 11. 5 6.4 4.3 7. 87 6.2 6.6 * Results in N e wt ons for 12mm width tape Stainless Steel Glass PVC Acrylic Polypropylene Polyester Coated Wood Standard TZe Tape Extra Strong Adhesive TZe tape Flexible ID tape Security tape

6. E* Fade Test Wherever you use P-touch laminated labels, they have been designed to stay as clear and legible as the day they were applied. Several Brother P-touch laminated labels in various colours were attached to stainless steel plates, and exposed to simulated outdoor UV radiation of approximately 12 months, and changes in the base colour of the tape could be observed (test compliant with JIS K7350-2/ISO 4892-2). The printed text on all tapes remained unchanged and was perfectly legible. The red, yellow and fluorescent tapes, however, showed some fading to the tape background colour. Other tape colours showed little or no change. Fade Resistant Labels Resistant to ultraviolet exposure <3 = colour difference is very hard to detect to the human eye >8 = colour difference is easily detectable to the human eye *472 hours approximates to 1 year in outdoor sunny conditions Fade Meter (Time - ∆ E) Tape Colour Transparent White Red Blue Yellow Green Fluorescent Orange Fluorescent Yellow Black Extra Strength Adhesive - White Flexible ID - White *∆ E (Delta E) results showing the amount of fading on various colours of TZe tape when placed in one year of simulated sunlight. Fade Test results Fluorescent Yellow Yellow Fluorescent Orange Red Transparent Blue White Green Extra Strength Adhesive - White Flexible ID - White Black Hours 0h 118h 236h 478h* 90 80 70 60 50 40 30 20 10 0 478h* 236h 118h 24.69 15.69 9.66 3.18 1.58 0.83 54.61 5.95 1.65 5.71 2.85 1.27 57.2 55.57 22.59 3.77 1.62 1.24 54.43 50.33 46.57 84.66 85.09 81.02 1.11 0.18 0.55 3.18 1.58 0.83 3.94 2.35 1.49

13. Frequently Asked Questions UL Certification A number of our TZe tapes have been tested by Underwriters Laboratories, a renowned independent testing laboratory. Our tapes have passed their rigorous safety standards and gained UL certification and we continue to test more tapes. For latest certification details and a list of certified tapes please contact your local Brother office. How long should security tape be attached before peeling off? We recommend that TZe security tape is affixed for at least 24 hours in order to work effectively. Do TZe tapes contain chloride? Chloride materials are used in TZe tapes (except clear or silver). Where is the chloride contained in the TZe tape layers? It is contained in the coloured base film layer. Do TZe tapes contain polyvinyl chloride (PVC)? There is no PVC in the cassette case, tape or ink. The colour layer of the base film includes some chlorine compound which means TZe tapes cannot be categorised as halogen-free. Do tapes contain REACH SVHC? Please see www.brother.eu/reach for the latest information. Do the tapes contain recycled material? TZe tapes contain at least 5% of recycled material. Can TZe tapes be used for the marking of electrical and electronic equipment (EEE) that is covered by the RoHS Directive? TZe tapes are in conformity with the requirements of the RoHS Directive, and do not contain restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) above the allowed limit values. Lamination provides an extra protective overcoat Frequently Asked Questions Are TZe tapes RoHS compliant? TZe tape cassettes themselves do not fall under the definition of EEE, but are considered as  consumables and not subject to the directive requirements. However, Brother works closely with our supply chain partners and others in the industry, including material and component suppliers, to ensure the RoHS compliance for TZe tapes. Lamination provides an extra protective overcoat

5. Temperature Test Whether you want to use our labels in freezing conditions or extremely warm environments, our labels have been designed to last. In fact, results show that Brother P-touch laminated labels can withstand temperatures from -80°C to +150°C. The Temperature Test Procedure Brother P-touch laminated labels were attached to stainless steel plates at room temperature, then heated and cooled for a specified time. After 72 hours at -80°C no noticeable change in tape adhesive or colour had occurred. After 2 hours at +150°C, despite slight discolouration of the tape, the text on the label remained completely intact*. We recommend TZe-M931/951/961 (black on matt silver) as most resistant to discolouration under high temperatures, and Flexible-ID tapes as most suitable when used in an Autoclave/Sterilising unit. Temperature Resistant Labels Resistant to temperatures of -80° to +150° Test Results Label performance after exposure to heat and cold Test: Temperature Temperature: +100°c Duration: 240 hours Labels: Brother P-touch Laminated Label Temperature Brother Laminated Labels *When used under extremely high temperatures or for long periods of time the laminate film may be separated, discoloured or shrink. If in doubt, request a free tape sample from Brother to perform your own testing. = No noticeable change = Text is legible but there was some tape discolouration. Matt silver tapes are most resistant to discolouration due to heat, and Flexible-ID tapes as most suitable when used in an Autoclave/Sterilising unit Hours 72 72 240 240 240 2

11. Further Tests Brother P-touch laminated tapes were firstly attached to stainless steel plates and immersed in various oils for 2 hours at room temperature. The tapes were then wiped with a cloth soaked in each of the various oils. Test Results During both tests, no change to the print quality occurred, and the labels remained affixed to the slides. Brother P-touch flexible ID tape was affixed to flat and smooth stainless steel at room temperature. The condition of the tape was observed after it was processed in an autoclave under the following test conditions. Autoclave test machine: Steam sterilizer GETINGE HS22 Test program: B cycle P11 *EN (European Standard) prEN13060 standard compliant Pre-vacuum: 4 times Sterilizing temperature: 134 °C Sterilizing duration: 5 minutes Drying duration: 20 minutes Test Results *1 some tape discolouration may be observed *2 some separation off the laminate film may be observed The table shows high durability of our flexible ID tape during the test. After several process cycles, some slight discolouration was observed. Nevertheless, the printed text stayed legible. Oil type: CASTROL synthetic coolants A=Honilo 981 B=Variocut B30 C=CareCut ES1 D=Iloform BWN205 E=Hysol X F=Alusol B G=Syntilo 81 E H=Syntilo 9954 The Oil Submersion and Adhesion Test Procedure The Autoclave Adhesion Test Procedure Oil type Insoluble coolant Soluble coolant A B C D E F G H TZe Standard laminated/ Extra Strength Adhesive/Flexible ID Immersed (2 hours) • • • • • • • • Wiped • • • • • • • • 1 cycle 5 cycles 10 cycles 20 cycles 30 cycles TZe Flexible ID Text blurring • • • • • Tape discolouration • • • • ∆ *1 Laminate film separation • • • • ∆ *2 Tape peeling • • • • • Further Tests

8. • • x •• • x • x •• •• x • • •• •• Test Results Toluene Hexane Ethanol Acetone Ethyl acetate Water 0.1N Hydrochloric Mineral spirit 0.1 Sodium Hydroxide P-touch Laminated Label Non-Laminated Competitor Label = Print quality unaffected = Print quality affected Water and Chemical Resistance Water and Chemical Abrasion Test Brother P-touch laminated tape was affixed to several glass plates. A 500g weight with a chemical and solvent infused cloth was passed over each label 20 times. As the results below show, the print quality of Brother P-touch laminated labels was unaffected, unlike our competitor’s non-laminated labels. Labels After Testing Test: Chemical Abrasion Chemical: Acetone Brother P-touch Laminated Label Non-Laminated Competitor Label Stage 2 Water and Chemical Abrasion Test Procedure Water resistant Resistant to a wide range of industrial chemicals

12. Frequently Asked Questions Frequently Asked Questions Can TZe tapes be submerged in alcohol? Submersion of TZe tapes in alcohol is not recommended for extended periods due to the possible deterioration of the tape adhesive. Do TZe tapes contain silicone? Since the tape liner itself is silicone coated on both sides, there is a chance that small amounts of silicone may remain on the adhesive layer underneath the label even after the liner is peeled off. Do TZe tapes contain latex? TZe tape uses acryl based adhesive materials and do not include latex. Does TZe tape contain lead? There is no lead in the cassette case, tape or ink. Can TZe tapes be used on circuit boards? We do not recommend that TZe tapes are used on circuit boards due to the sensitivity of circuit boards to dust, static electricity and acid (although these are at very low levels in TZe tapes) Can TZe tapes be used to label food? TZe tape can be used safely on food packaging but should not be in contact with the food itself. Can TZe tapes be used on copper? As adhesive materials used in our tape are acrylic and weakly acid we do not recommend that TZe tapes are used on copper. How accurate are the tests in simulating real-world examples? Every effort was made to ensure the tests accurately simulate real-world examples. However when tapes are used in the real-world, many factors could change the results of these tests, such as surface material, heat, moisture, pressure, chemicals etc. If in doubt, always test Brother P-touch laminated tapes in your own environment to ensure they meet your requirements. How thick are TZe tapes? TZe tapes are around 160 micro metres in thickness, but this varies slightly by tape type. Which colour tape is recommended for high temperatures? We recommend TZe-M931/951/961 (Black on matt silver) as most resistant to high temperatures in terms of discolouration. When I remove the label will messy adhesive remain? How can I remove it? Tapes can be removed from most materials with relative ease leaving little or no adhesive on the material. Extreme heat, humidity and certain chemicals may result in some residual adhesive being left but this can be removed in most cases with Ethanol. Which tape is recommended for cable labelling? TZe Flexible ID tape for wrap or flag labelling or HSe Heat Shrink Tube. Do TZe tapes create any outgassing? The following gases may be produced when labels are in a hot environment such as in front of an air conditioner: toluene, n-butanol, 2-ethylhexyl alcohol, butyl carbinol acetate. These levels are however very low. Lamination provides an extra protective overcoat Lamination provides an extra protective overcoat

7. • • • • • • • • • Water and chemical resistance tests were conducted in two stages: Stage 1 - The water and chemical submersion test Stage 2 - The water and chemical abrasion test To test Brother P-touch laminated labels against the effects of water and chemicals, the tapes were firstly attached to glass slides and immersed in a variety of liquids for 2 hours. No change in the print quality occurred, and the labels remained affixed to the slides. Although some labels soaked in certain chemicals showed slight separation of the laminate film, rubbing the labels with the same chemicals had no effect at all. So even if chemicals are spilled on your Brother P-touch laminated labels, a quick wipe should be enough to prevent any damage. Water and Chemical Resistance Water and Chemical Submersion Test Stage 1 Water and Chemical Submersion Test Procedure Test: Water and Chemical Chemical: Ethanol Submersion Duration: 2 hours Labels: Brother P-touch Laminated Label Water resistant Resistant to a wide range of industrial chemicals Test Results for Brother P-touch Laminated Labels = no print discolouration • Toluene Hexane Ethanol Ethyl Acetate Acetone Mineral Spirit Water 0.1N Hydrochloric 0.1 Sodium Hydroxide

10. Brother P-touch laminated tapes are available in a wide range of tape colours, widths and styles. Your application and your choice of P-touch model should guide your ultimate tape selection. The table below will also help you to determine the correct tape for your applications. Choose the right tape for the job Choose the right tape for the job Choose the right tape for the job Actual tape colours may differ slightly from the printed colours. The availability of TZe tapes may also vary in different countries. *4m, **5m, ***PT-9700PC / PT-9800PCN ****PT-E300VP / PT-E550WVP 3.5 mm 6 mm ※ 5.8mm 9 m m ※ 8.8mm 12 m m ※ 11.7mm 18 m m ※ 17.7mm 24 m m ※ 23.6mm 36 m m Standard Laminated - 8m TZe-111 TZe-121 TZe-131 TZe-141 TZe-151 TZe-161 TZe-132 TZe-133 TZe-135 TZe-145 TZe-211 TZe-221 TZe-231 TZe-241 TZe-251 TZe-261 TZe-231S* TZe-222 TZe-232 TZe-242 TZe-252 TZe-262 TZe-223 TZe-233 TZe-243 TZe-253 TZe-263 TZe-334 TZe-344 TZe-354 TZe-315 TZe-325 TZe-335 TZe-345 TZe-355 TZe-365 TZe-421 TZe-431 TZe-441 TZe-451 TZe-461 TZe-431S* TZe-435 TZe-521 TZe-531 TZe-541 TZe-551 TZe-561 TZe-535 TZe-555 TZe-611 TZe-621 TZe-631 TZe-641 TZe-651 TZe-661 TZe-721 TZe-731 TZe-741 TZe-751 Fluorescent Laminated - 5m TZe-B31 TZe-B51 TZe-C31 TZe-C51 Matt Laminated - 8m TZe-M31 TZe-MQL35** TZe-MQP35** TZe-MQG35** Metallic Laminated - 8m TZe-M931 TZe-M951 TZe-M961 Non-Laminated - 8m TZe-N201 TZe-N221 TZe-N231 TZe-N241 TZe-N251 Flexible ID Laminated - 8m TZe-FX211 TZe-FX221 TZe-FX231 TZe-FX241 TZe-FX251 TZe-FX261 TZe-FX611 TZe-FX621 TZe-FX631 TZe-FX641 TZe-FX651 TZe-FX661 Strong Adhesive Laminated - 8m TZe-S121 TZe-S131 TZe-S141 TZe-S151 TZe-S211 TZe-S221 TZe-S231 TZe-S241 TZe-S251 TZe-S261 TZe-S621 TZe-S631 TZe-S641 TZe-S651 Fabric - 3m TZe-FA3 TZe-FA4B Security Laminated - 8m TZe-SE4 High Grade Laminated *** - 8m HGe-131V5 HGe-151V5 HGe-231V5 HGe-251V5 HGe -261V5 HGe-631V5 HGe-651V5 HGe-M931V5 HGe-M951V5 Heat Shrink Tube - 1.5m **** HSe-211 ※ HSe-221 ※ HSe-231 ※ HSe-241 ※ HSe-251 ※ Tape Options TZe Laminated Strong Adhesive Flexible ID Security Heat Shrink Flat Surface Smooth Textured Curved Surface Smooth Textured Cable Flag Smooth Textured Cable Wrap Smooth † Textured † Recommended Acceptable Not Recommended † Model name Width Recommended cable diameter HSe-211 5.8mm Ø1.7mm to 3.2mm HSe-221 8.8mm Ø2.6mm to 5.1mm HSe-231 11.7mm Ø3.6mm to 7.0mm HSe-241 17.7mm Ø5.4mm to 10.6mm HSe-251 23.6mm Ø7.3mm to 14.3mm

Pregledi

  • 188 Total Views
  • 137 Website Views
  • 51 Embeded Views

Радње

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 3

  • 8 www.irvas.online
  • 1 www.irvas.rs
  • 1 irvas.irvas.online